Symbols of elements of the territory improvement passport for the inventory plan

The house is highlighted in gray on the cadastral map

To search for information on a specific house, it is enough to know the address of its location or cadastral identifier. The resource will offer the following information:

Area, address of the object
Purpose
Land category
Information about land surveying
Accounting date
Type of ownership
Status

If the number and address are unknown, the house or plot of interest can be found using a map of the area. Using the service, you can find any object. In addition, through it, users can issue an extract from the Unified State Register of Real Estate and a certificate of cadastral value.

Symbols on the situational plan

The situation plan, unlike the General Plan, is not accurate and cannot serve as a basis for design, repair and construction work. The main purpose of this plan is to visually demonstrate the interaction of the described area with surrounding objects and provide objective information about the nature of this interaction.

At this scale, a situational plan of the site is drawn up for laying engineering and communication networks, as well as in cases where a graphic justification for a more detailed topographic survey is required. Such a plan becomes the basis for a project for gasification, water and electricity supply to facilities located within the boundaries of the site.

We recommend reading: Filling out the Waybill Sample 2020 Point by Point

The house is highlighted in gray on the cadastral map

If it is available and it contains the diagram and coordinates of the house, therefore, the property is included in the Unified State Register of Real Estate. This means that the owner needs to apply to update information about the building on the cadastral map.

The absence of this section in the Unified State Register of Real Estate indicates that the technical plan of the house has not been registered in the state real estate register. To register, the owner will have to submit a technical plan to the MFC.

Another situation is that a plot has disappeared from the cadastral map.

This is possible due to technical errors when updating the database. In this case, you need to write an application to Rosreestr, attaching the existing extract from the Unified State Registration Register. Another reason for the disappearance of the object is that the boundaries of the site were set before 2001.

The owner can use such a plot without land surveying, but it will be more difficult to sell it.

Info

Why is my plot not on the public cadastral map? Many people have to look for an answer to this question when they need to sell or establish adjacent boundaries. Most often there are two reasons why there is no site:

No boundary work was carried out in relation to the landfill.
The owners did not register the plot in the state register.

To find out whether the borders are set or not, you need to issue an extract from the Unified State Register of Real Estate. If the document contains an entry that the boundaries were not established, the owner will have to call a land management specialist. He will measure the plot, establish its boundaries using coordinates and draw up a boundary plan.

With this document, the owner already applies to the MFC to enter information into the Unified State Register. But if even after this you could not find the desired area on the map, we advise you not to rush. Updated materials are not always immediately available.

The technical plan will include the following information:

Floor plan of the house
Geodetic basis
Verified measuring instruments
Methods, formulas for determining coordinates
Description of location with coordinates
Address, name and purpose of the object
Cadastral number of the land plot on which the building was erected
What are external walls made of?
Year of construction
Building area
Schematic representation of the location of the building on the memory

Based on the technical plan, Rosreestr will register the building and issue ownership rights to it. It happens that information about a house does not appear on the cadastral map even after contacting the registration department. In this case, check the USRN extract: does it contain section No. 5 or not.

Do you have a question about redevelopment?

In the conventional graphic designations of elements of existing structures and devices given in 1-3, 5, 13 of Table 4, shading is not performed. In the image of an overpass, viaduct, overpass located in non-flooded areas, the marks of high water (HLW) and low water (HLW) horizons are not indicated.

A plan on this scale is used to develop project plans for the construction of large-scale and important facilities. As a rule, a 1:1500 situation plan is drawn up based on recently obtained topographic data.

An email with instructions to reset your password has been sent to the email address you provided.

How to find red lines on a cadastral map

D-Mer , there may be a situation that on the state. cadastral registration of land. uch.

Why is the area shifted relative to the satellite image? If your site has shifted by several tens of meters relative to its image on the satellite image, then most likely this is a registration error (the cadastral engineer did not register this site correctly, you need to contact him to redo the work), but if your site is shifted quite a bit relative to, for example , the outline of the fence, then there is nothing wrong with this: this arises due to an error in loading the raster image, since the satellite photographs the Earth, which, as everyone knows, has the shape of a ball, with flat coordinates in the Rosreestr.

To finally remove all doubts, you can order the service of placing points on the ground - a cadastral engineer will show where the coordinates that are listed in Rosreestr actually are on the site.

3.

Clicking will open a window with data about the plot of interest, where the status of the plot will be indicated in the “Form of ownership” field.

Land survey plan symbols 2020

In addition to this, in 1783, a printed atlas for the Kaluga governorship was legalized as a model for boundary maps and atlases for demarcated provinces. Then, in 1839, the Highest approved samples of symbols for all kinds of plans and maps, but in the form of special tables, were sent out from the Governing Senate to all departments, including the boundary department. Since then, the symbols for boundary plans and maps have not changed and do not have official publications, with the exception of signs for plans of Little Russia and Transcaucasia, which have only local significance.

The boundary plan consists of text and graphic parts, which are divided into mandatory sections and sections, the inclusion of which depends on the type of cadastral work. Mandatory sections are: initial data; information about measurements and calculations performed; layout of land plots; drawing of land plots and their parts. In some cases, the boundary plan includes the conclusion of a cadastral engineer (if, for example, the previously established boundaries of land plots do not correspond to their actual location; it is necessary to justify the size of the land plots being formed).

Public cadastral map: Instructions for using the Rosreestr cadastral map

Directly from the service, you can use the following services: view the property management and control plan, make a request to receive reference information online (the required property number is already indicated in the form). It will also be possible to send a request for information from the State Property Committee and the Unified State Register.

Why is the house highlighted in red on the cadastral map?

After finding the object of interest, it is easy to determine its address (if it is found by cadastral number), unique code (if it is found by address), boundaries, status, declared area, category, permissible use, who serves, and registration date.

Order of the Ministry of Economic Development of Russia dated N 921 (as amended

If there is no information about such real estate objects in the Unified State Register of Real Estate, these details contain previously assigned state registration numbers (inventory or conditional), including those contained in the documents available to the customer of cadastral work. Details of documents containing information about previously assigned state registration numbers are indicated in the “Input Data” section; in the “Cadastral Engineer’s Conclusion” section information is provided about the absence of information about such real estate objects in the Unified State Register of Real Estate.

63. The section “Information about parts of the land plot” is included in the boundary plan immediately after the section “Information about the formed land plots”, the section “Information about the changed land plots”, the section “Information about the updated land plots” about the corresponding land plot, if in In accordance with the type of cadastral work performed, the preparation of such sections is provided.

We recommend reading: The amount up to which the child deduction is provided in 2020

Symbols Land Survey Plan 2020

In the upper left corner we see an arrow, with the help of which it is clear how the topographic survey is oriented towards the north. On a topographical survey, this direction may not be indicated, since by default the plan should be oriented with its top part to the north.

There is a concrete pole on the site with a power cable from the pole on the street to the house on the site. An underground gas branch runs from the gas pipeline route to the house. The underground water supply is connected to the house from the neighboring plot. The fencing of the western and southern parts of the site is made of chain-link mesh, while the eastern part is made of a metal fence more than 1 meter high. In the southwestern part of the site, part of the fencing of neighboring sites made of chain-link mesh and a solid wooden fence is visible.

07 Feb 2020 juristsib 299

Share this post

The original sick leave certificate must be submitted to the Social Insurance Fund 2020
Payments for child custody in 2020
Tax Return 3 Personal Income Tax for 2020 Sample Filling Out for Treatment
Fees for Kindergarten in 2020 Priozersk

Designations on the boundary plan

Collections of symbols for maps and topographic plans of various scales are created in accordance with this division into objects. Approved by state organs, they are the same for all topographic plans and are required when drawing any topographical surveys (topographic surveys).

The procedure for obtaining a boundary plan of a land plot

The survey plan can be made in two forms - printed or electronic. Electronic plans have the same legal force as traditional paper plans, and at the same time are more convenient to use. They also have the official seal and signature of cadastral engineers, indicating the authenticity of the documents. Conservatives often ask: “Why do we need electronic documents if we have printed ones?” Serious real estate transactions require sending documentation to different addresses in electronic form, which is impossible to do with printouts.

From a legal point of view, a site survey plan is an official document in which the results of survey conducted by certified specialists are entered. Also, all the necessary information contained in the cadastral plan and all data from the real estate cadastre are entered into the land survey plan. As a result, this paper becomes the main technical document necessary for working with the site.

We recommend reading: Father's Day In November 2020 What Date?

Legend

When filling out the details of the text part of the boundary plan, the designation of the formed part of the land plot being formed is indicated in the form of the designation of the land plot being formed, an oblique line and a combination of lowercase letters of the Russian alphabet “ chzu ” with a number written in Arabic numerals (for example, 50:08:010203:123:ZU5 /chzu1 or :ZU5/chzu1 ).

cadastral number of the original (modified) land plot, a colon and a combination of capital letters of the Russian alphabet “ ZU ” with a number written in Arabic numerals (for example, 19:05:010203:123:ZU1 ) - in the case of preparing a boundary plan as a result of cadastral work on formation of land plots through division and allotment;

Building plan: requirements, symbols, design

So, the building plan, in accordance with the norms of Federal Law No. 221, is a document that reflects the basic information that is present in the state cadastre, as well as information about the building necessary for registering it. The plan can also reflect in detail information about certain parts of it and others that are necessary for making entries about the construction project in the cadastre.

The purpose of the text block is to reflect the most detailed information about the object. It can contain various symbols that optimize the presentation of this or that information in the document. The text block of the building plan contains sections that reflect: