Technical plan of a house: residential, garden, country house

How to register a house with the BTI

With a spatula.
Soak with water Iron through a wet rag Yes, someone joked))) scrape off options - a bracket on a drill/hammer, a metal brush or an ax It’s more expensive to tear it off, it’s easier to putty. There is no way to remove the first slate with rottbant and then putty on it . There was an old burnt house on the site. We received a building permit to replace the old house. When we applied for a building permit, the dimensions of the house were stated to be larger than what was eventually built (as far as I know, to build a smaller one possible, no longer possible) the house itself was built without a design, how can we now register it and remove the old one? The procedure, if anyone knows, please tell me.

How to register a house with the BTI

To register a house belonging to the secondary real estate market, you must additionally provide a document that certifies ownership of the real estate (sale and purchase agreement, exchange, deed of gift or document of inheritance) and a title document;

In general, the application is a form in which reliable and complete information must be entered point by point. This form contains tips and advice on how to fill it out correctly. Depending on how the application will be submitted (the methods of submitting documents are described further in the text), it can either be downloaded via the Internet and printed, or filled out electronically, or received and filled out directly at the places where these applications are accepted.

Multifunctional center - Novosibirsk

Where to get it

Improving living conditions by obtaining an apartment from the municipality in Novosibirsk in 2020

What is needed to register a house with the BTI

The procedure for registering housing and obtaining owner rights is a very important and responsible step for any citizen. Therefore, you should approach it with maximum responsibility and find out about all the documents that need to be attached to the application for registration with the BTI.

In cases where country real estate that is not related to dacha associations is subject to registration, the list of submitted documentation corresponds to that provided with new houses or those that belong to the secondary housing stock. The only difference will be the size of the land allocated for construction.

Multifunctional center - Novosibirsk

Establishment

Dacha amnesty in Novosibirsk in 2020

Cadastral registration of an individual residential building

Any individual residential building requires mandatory cadastral registration. This is not an easy task, but only after registering your residential building can you sell this premises and also register it with the registration chamber. Registration of your residential building in the cadastral register provides a complete guarantee that your home can be sold or exchanged at any time.

Before listing, you should make sure that the plot of land on which your residential building is located is included in the state register. The house itself should be measured, after which you can safely register the residential building with the cadastral register. A plot of land is measured by a cadastral engineer. To register a residential building in the state register, you must provide a cadastral passport of a residential building, a technical passport of a residential building, documents confirming your legal ownership of the land, as well as an extract from the state register and an address decree. After submitting all documents to the registration chamber, you can safely register your residential building.

What to do after cadastral registration

After receiving the EGRN extract, the owner decides what to do with the apartment or non-residential premises. An object can be excluded from the Unified State Register only if it loses its physical existence. For apartment buildings, this may be demolition due to emergency conditions, destruction due to emergency situations. Premises are deregistered after division or merger, or upon demolition of the main building.

How to register a house with BTI

Step #1 . Contact the BTI of the area where the new house was built. Fill out the application on the form provided. Show your passport and construction passport. Pay the receipt for the technical employee’s visit to the accounting facility. You will be given a date when a specialist from the BTI department will arrive to inspect the building.

Interesting read: How to open a personal account in a pension fund

A property is registered so that the owner pays taxes to the state for it. Throughout Russia there is a huge number of unregistered real estate properties, the owners of which do not pay property taxes. And government services conduct entire raids to identify violators and force them to pay money to the treasury.

How to register a house with BTI

We now have the so-called interdepartmental interaction, so the registrar in Rosreestr via the Internet can make a request to the cadastral chamber database on whether such an object exists in the database or not. If it exists, but with different characteristics (for example, there was a redevelopment), then you can make the necessary changes. To do this, you will need to make a new technical plan (with the help of a cadastral engineer or BTI authorities). Then the changes will be made to the cadastral passport. If the resulting parameters of the apartment correspond to the data on the certificate of ownership that was issued earlier, it does not need to be changed. And if the data differs, then you need to write changes about making changes to the certificate of ownership. Get a new certificate.

He was accepted back in 2007. During its operation it was significantly changed. Therefore, in order to prepare a correct and complete package of documents for registering a house with the cadastral register, you should familiarize yourself not only with the law itself, but also with the amendments made to it.

How to register a house with BTI

Until 03/01/2020, obtaining permission to put an individual housing construction project into operation, as well as submitting this permission for registration and issuance of a technical passport for such an object is not required (Law of December 29, 2004 N 191-FZ); b) if you do not have documents permitting the construction of an individual housing construction project, or if they are irretrievably lost (Law N 218-FZ; Requirements for the preparation of a technical plan N 953; Requirements for the preparation of a declaration, approved by Order of the Ministry of Economic Development of Russia dated December 18, 2020 N 953; FSBI "FKP Rosreestr" dated July 27, 2020 N 10-1604-KL):

The registration process in the cadastral registry can be depicted in the following diagram. Procedure for registering a private house in the cadastral registry To register a private house in the state registry, located on an individual housing construction site or private plot of private plots, you must submit the following documents:

Time frame for preparing a technical plan for a house

The time required for the development and execution of a technical plan for a residential building, garden, country house or other building depends on the scope of work and the type of real estate. On average, a technical plan for houses with an area of ​​up to 500 square meters is drawn up within 7-10 working days from the date of the surveyor’s departure. Add the same amount to complete the registration procedure with the Rosreestr authorities. In total, preparing a technical plan for a house takes 14-20 days. The time frame for drawing up a technical plan for a garden or country house may increase due to the inaccessibility of access to the property in winter, so plan to draw up a technical plan for a house taking into account the specific location of your building.

How to register a house in the cadastral register

If your house was built without a permit and is an unplanned building that was erected before October 30, 2001, then you can register it in the cadastral register and register ownership rights in a simplified manner, guided by Federal Law No. 93. To do this, contact the BTI, fill out application in a unified form, indicate in it that the house is unplanned. A technician will come to you, make a list of necessary work, on the basis of which a cadastral passport and plan will be issued for the house, and a number will be assigned to the house. Take an extract from the cadastral passport and a copy of the cadastral plan and register your property rights with the FUGRTS.

Contact BTI. Fill out the application on the form provided. Show your passport, construction passport. Pay the receipt for the technical employee’s visit to the accounting facility. You will be given a date when a specialist from the BTI department will arrive to inspect the building.

Why do you need to develop this documentation?

Technical documentation is needed when implementing the following issues:

• when a structure or building is divided into separate components, which receive their own cadastral number;
• to apply to the courts in Novosibirsk;
• submitting an application to register an object for cadastral registration;
• initial commissioning of the facility into official operation;
• to deregister during demolition or alteration of an object;
• when registering facts of change of ownership (purchase and sale, inheritance, rent, exchange, and so on).

Registration of a residential building in SNT in Novosibirsk in 2020

Deregistration of a house with the BTI

The list of documents for deregistration of an object is established by Article 22 of the Federal Law of July 24, 2007 No. 221-FZ “On the State Real Estate Cadastre” “Composition of documents required for cadastral registration”. According to this article, you only need to provide a statement and a certificate stating that the object does not exist.

To remove a house from the inventory register in the BTI, you need a technical passport (plan) of the house and recording the fact that the house is not in its original location. This can be done by a BTI engineer on site. A new cadastral passport for a virtually absent object is not needed. It is enough to obtain a certificate of cadastral registration of the house. Such information may also be contained in the old cadastral passport.

Multifunctional center - Novosibirsk

Where to apply

How to obtain a cadastral passport in Novosibirsk in 2020

How to register a house with BTI

The reasons for suspensions and refusals in the implementation of cadastral registration in the volume of technical documentation submitted in this case can be found in abundance (from minor technical errors, to serious errors in the number of storeys in the issued RVE, non-compliance of the submitted documentation with the project, etc.).

Interesting read: Just after Chernobyl in Moscow

Apartment in a new building Technical documentation is prepared by employees of the Technical Inventory Bureau after the house is put into operation or is registered in the cadastral register. Bureau employees take measurements of the premises, and the owner of the apartment is obliged to provide them with an agreement with the developer or another document on ownership rights. After completing the work, he is given a document in paper form, and an electronic version is sent to the Cadastral Chamber. Apartment after redevelopment It is allowed to be carried out only after agreement with the BTI. After completion of the repair work, the engineer takes measurements of the new premises and draws up a new plan. Bureau employees are provided with a resolution stating that the repair work has been approved. Then the owner is given a paper version of the document, and the electronic version is sent to the Cadastre

Registration of real estate objects for cadastral registration

Hello, Alexey! If you inherited a plot of land, then accordingly you have the right of ownership to it, obtained according to the old order (before 1997). For proper registration, you must go through a new procedure. To do this, you need to register the land in the cadastral register, and then contact the federal registration service, where they will register ownership of the heirs. Therefore, contact a cadastral engineer to draw up a technical plan. And then according to the standard scheme described in the article.

Hello, my question is the following: I have land leased for individual housing construction, a foundation has been built on it, it is registered as unfinished in the state register, my land lease period is until December 2020, on this land there is also a 6x6m building with an attic with a total area of ​​54m2+ barns, this second building is not registered, I call it a bathhouse. I had a check on compliance with the correct use of the land, and I was told that since March 2020 a law has been passed that says that the land can be taken away from me if I do not build a house, which I still have at the foundation stage, despite the fact that I have a registered incomplete...I'm shocked. They tell me that I can register my second house 6x6m as a full-fledged house and I need to get a building permit for it and register it as a house... and slowly build a house at the foundation stage, the building permit for it is until August 2020, then contact the cadastral ...Please tell me what I should do and the order of my actions...What do I need in order to obtain permission to build a second house on a plot with a plot area of ​​13 acres...

Order a technical house plan

To obtain a technical plan of the house, the property owner must provide our cadastral engineer with a list of documents for drawing up a technical plan. Please note that it is advisable to draw up a technical plan for the house after the site has been surveyed. You can order a technical plan for a house regardless of its location - both in Moscow (including new Moscow) and throughout the Moscow region. Our cadastral engineers will advise and provide assistance in drawing up a notice or declaration, and will also help in any matter regarding the preparation of a technical plan for the house. For additional advice or to conclude an agreement, please contact the office directly by phone or email (Contacts section).