The procedure for sealing an electricity meter

When is meter sealing required?

This year, almost all respectable citizens managed to register a water meter and put a seal.
Although situations often arise when re-filling is needed. It is extremely undesirable to undertake the installation of the meter yourself, because before sealing you will definitely be required to present documents made by the organization that carried out the installation and has permission to do so.

It is extremely necessary to seal the water meter when:

• after you move into a new apartment;
• the meter has expired;
• a major failure occurred in the system;
• the water meter suddenly breaks or is damaged;
• the water supply system was being repaired;
• The ball valve is broken.

This means that water meters need to be sealed immediately after any mechanical impact on the meter has occurred.

How to buy and register a water meter correctly?

In order not to encounter problems during the operation of water metering devices, it is necessary to approach their acquisition with the utmost seriousness.

Ecialists do not recommend choosing any special water metering devices.
The best option is a mechanical counter. Using electronic devices is not the best solution, since they break down quite quickly during operation. And this means additional expenses and unnecessary worry for the apartment owner. When purchasing a water meter, the most important thing is to ask the seller for a certificate of conformity for the product. He must definitely provide it.

Selection rules

Currently, stores offer meters for metering hot and cold water, between which there are certain differences in terms of design. It is easy for the average consumer to make a mistake when purchasing. To make it easier to distinguish them, you should know that the cold water meter has a blue stripe , and the hot water meter is marked with a red stripe on the body.

If you made a mistake and purchased two meters with a red stripe for installation in your apartment, then nothing will happen to them during the work. The only thing is that purchasing them will cost you significantly more. You should also know that installing a device with a blue stripe on hot water is not allowed. If it is installed, the inspector will simply not allow the device to be used.

Before purchasing meters, you should carefully read the kit. In addition to the meters themselves, the box should contain:

• connectors with nipples;
• filter;
• check valve

In markets, meters can be sold separately from components. Therefore, in order to avoid large expenses, you should go to a specialized retail outlet when purchasing water meters.

When purchasing water meters, special attention should be paid to the shut-off valve. It should have an eyelet for a filling. If it is missing, then sealing the node will not be possible. If this part is missing, the owner can independently turn off the water tap by connecting a section of pipe and draw any amount of water at zero flow.

The meter can be used with both a metal and metal-plastic shut-off valve. Experts recommend purchasing an additional faucet for the toilet cistern. In this case, you can use the sanitary product even during renovations in the bathroom or kitchen.

An important point is the passport for the meter. If the selected water meter model does not come with a passport that was printed in the printing house, then it is better not to purchase such a device. You should also pay attention to the fact that the serial number present on the product matches the one indicated in the document.

Certain problems may arise when installing the meter:

• the tap that shuts off the water supply to a city dwelling has broken down;
• no access to the plumbing closet;
• The service life of the pipelines has expired.

To solve this problem, it is necessary to order taps from the company that will install the devices and turn off the water in the risers for the duration of the work. that arises with the cabinet is most often solved by a specialist who arrived at your apartment to carry out work on installing meters. It is better to replace old risers with new ones, at least partially. In order for the meters installed in your apartment to be registered, you must submit an application and information about the ownership of the living space:

• FULL NAME;
• passport details and phone number.

If water meters are installed at an enterprise, then it is necessary to indicate the name of the institution, as well as provide the state registration address and contacts. When submitting an application, you must indicate the desired time frame for sealing the metering devices. In addition, even before the technician arrives, it is necessary to make copies of the meters’ technical data sheets. If the installation of metering devices for some reason cannot be completed within the timeframe specified by the applicant, then the organization must agree on a new date with the customer. However, this must happen no later than 15 days after the application deadline.

Many houses located outside the city have central water supply. There it is also necessary to install water meters for cold water. If there is hot water, then most often it comes either from the boiler or from a boiler installed indoors.

When installing a water meter in a country house, the following points must be taken into account: the meter can only be installed in a room in which the temperature does not drop below + 5 degrees Celsius during the cold season. If this condition is not met, then it is necessary to carry out work to insulate the pipes of the device itself , as well as the room.

There is another option for installing the meter - using a special chamber for the device. Also, the room in which the device is installed must have good lighting to provide an opportunity for servicing it and taking readings from the devices.

Each apartment must have a meter installed. It allows you to keep track of water and pay only for the water consumed. Buying a meter today is not a problem, since they are offered in many plumbing supply stores. You can also buy them on the market. The process of purchasing a device should be approached with full responsibility. The device must be certified and have a technical passport.

In order for the readings from the device to be taken into account, you must register the device. To do this, you should contact special organizations. Specialists will install the device, seal it and register it. It is worth choosing companies that have permission to carry out such work.

Source: stoki.guru

Who seals the meters?

A water meter can be sealed only by a representative of the company that has the legal right to draw up documents for this operation, the most basic of which is the sealing act.

Sealing must be carried out in accordance with clause 41 of the Decree of the Government of the Russian Federation No. 167 of February 12, 1999. Before sealing the meter, the specialist must check:

• meter integrity;
• the correctness of its installation.

The employee must provide the owner with a package of documents, which should be kept and presented to the water utility employees when repairing or replacing the meter.

It is important to choose the company that will perform the filling for you. Before the employee gets down to business, the main thing is not to forget to check:

• filling license;
• Is it possible to use warranty and service;
• Availability of forms for registration of documents.

Remember! The company that installed it is responsible for the correct installation of the meter, and the owner is responsible for the presence of the seal and its integrity.

We recommend a hydraulic accumulator in a water supply system: functions and principle of operation

What to do if the integrity of the seal is damaged?

If a violation of the integrity of the installed seal is detected, the following steps should be taken:

• Take a photo of the general view of the device and a close-up of the damage.
• Immediately notify the service provider.
• Write an application to the company, two copies are drawn up, one of which remains with the consumer.

Sealing an electric meter is a very important process, so it must be approached responsibly. If the rules are ignored, the supply company may file a lawsuit for theft of electricity, with serious consequences for the consumer.

Time and cost of sealing

The time frame for sealing a water meter varies greatly for different models. The old model device has a shorter period of time, while the new model has a longer period. Often the employee comes within five days after being called. The homeowner will need to present the installation certificate and the registration certificate for the water meter to the master. As a rule, the inspector only checks the correct installation and the absence of damage to the meter.

The one who must seal the meters is required to inspect the entire unit, as well as provide a commissioning certificate. All documents that the inspector provides must be carefully re-read, because they may contain errors in the date, or the subscription fee or other tariffs may be too high.

Costs for the water meter begin to be calculated from the day the contract is concluded, which is made in two copies, one for each of the parties. According to the instructions, the inspector is obliged to independently photocopy the meter’s passport and return the original to the owner, but it is better to bypass this point slightly in order to get rid of unnecessary legwork. Make copies ahead of time so you can give them to the master immediately after sealing.

According to clause 5 of Article 20 of the Federal Law “On Water Supply and Sanitation” dated January 1, 2013, sealing of water meters should be done free of charge in the following cases:

• water meter installation;
• repair;
• checks.

But, if the water meter was damaged due to the fault of the user, then he will be required to pay from 500 to 2000 rubles, this amount varies for each company.

We recommend HDPE Pipes. Where is the best place to use it? Advantages of HDPE pipes for water supply or sewerage. Connection with fittings and soldering. Video

How to seal a meter. For the master. Video

If the owner wants to return his money, which was demanded from him for sealing water meters, then he should contact Rospotrebnadzor with a complaint against the service company, and also file an application in court. Although, many consider this a thankless and protracted task.

Sealing of water meters

Free sealing of water meters is the responsibility of the company that provides you with this service. The only exception to the rules may be the failure of the seal due to the fault of the owner of the apartment or house. Regulatory acts In 2011, the Federal Law on Water Supply was adopted. The edition at the end of 2020 changed it, including the paragraph regarding the sealing of water meters.

Since the beginning of 2020, metering devices have been sealed at the expense of the organization (most often it is housing and communal services or a management company). Subscribers are charged only if the seal is broken or damaged due to the fault of the property owner.

In this case, it is applied again at the expense of the consumer. In this case, it does not matter who is to blame in this case: the owner of the house, apartment or his guests (that is, third parties).

How to seal an electricity meter - procedure

Every consumer must seal the electricity meter.

The seal confirms that there has been no unauthorized intervention into the meter, no illegal connection or theft of electricity.

The seal also confirms the serviceability of the device and its compliance with the requirements. What types of seals are there, how are they applied, can the apartment owner himself perform the sealing, and how much does the service cost?

Instructions for sealing an electric meter

Common people rarely face the issue of sealing an electricity meter, so questions often arise: how to do it correctly? Let's look at each stage in more detail to have a complete understanding of all the nuances.

Contact the energy network and submit an application

We have already found out that only a specialist from an energy sales company can put a seal. Accordingly, you need to contact the nearest branch. This must be done after installing the device, but no later than 30 days after installation.

When visiting an energy supplier, you must submit an application for sealing of the electric meter, which should indicate:

1. Personal information about the owner of the property.
2. Address of the location of the object.
3. Contact information.
4. Subscriber's personal account number.
5. Name of the metering device.
6. Reason for installation: primary, replacement, transfer or due to faulty wiring.

The application form can be obtained from the energy supply company or you can create it yourself.

Personally visit Energosbyt

After completing the application for sealing, the specialist will issue a receipt for payment for services, if the procedure is a paid one. After making the payment, you must return to the energy sales company and provide a copy of the payment document. Only after this the application will be accepted for processing.

If possible, the time of arrival of specialists is agreed upon

As soon as you have submitted an application and paid for sealing services, you can agree with your electricity supplier on the day and time of the technician’s arrival. If at the moment the specialist cannot give an exact date, then ask to call the contacts specified in the application.

After the electricians arrive, observe their actions

When an electrician arrives at your address, be sure to check his documents to ensure that the sealing is legal. It is advisable not to leave the specialist while he is carrying out work. Check the correct installation of the seal and the reliability of its fixation.